jak podkręcic procesor intel pentium 4 2.4 ghz

[rogacz]

Wie ktoś moze jak podkrecic pentium 4 2.4 ghz
moja plyta to MATSONIC MS9107C
jak by byly jeszcze jakies informacje potrzebne to podam

[stary*]

a jaki zasilacz, chlodzenie procka??Jakie temperatury osiąga Twój proc, poszczególne podzespoly???

[rogacz]

SiSoftware Sandra

System
Manufacturer : VIA Technologies, Inc.
Model : P4X333-8233A
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

Mainboard
Manufacturer : Elitegroup (ECS)
MP Support : No
Model : P4X333-8233A
System BIOS : 09/20/2002-P4X333-8233A-6A6LWE19C-00
Chipset : VIA P4X266/A

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 3GB
Bank0/1 - A0 : DIMM 256MB
Bank2/3 - A1 : DIMM 256MB
Bank4/5 - A2 : DIMM 512MB

Chipset 1
Model : Elitegroup Computer Sys VT8753 Apollo P4X266 System Controller
Bus(es) : ISA AGP PCI USB i2c/SMBus
Front Side Bus Speed : 4x 133MHz (532MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 100MHz / 2x 133MHz
Width : 64-bit
IO Queue Depth : 8 request(s)

Chipset 1 Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 2/1x
Speed : 4x 88MHz (352MHz data rate)
IO Queue Depth : 9 request(s)

Logical/Chipset 1 Memory Banks
Bank 0 : 256MB DDR-SDRAM 2.5-3-3-7 2CMD
Bank 2 : 256MB DDR-SDRAM 2.5-3-3-7 2CMD
Bank 4 : 512MB DDR-SDRAM 2.5-3-3-7 2CMD
Bank Interleave : 4-way
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 1/1x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No

Memory Module 1
Type : 256MB DDR-SDRAM
Technology : 8x(32Mx8)
Speed : PC2100U 2.5-3-3-6
Date of Manufacture : 25 grudnia 1999
Set Timing @ 133MHz : 2.5-3-3-6
Set Timing @ 100MHz : 2.0-2-2-5

Memory Module 2
Type : 256MB DDR-SDRAM
Technology : 8x(32Mx8)
Speed : PC3200U 3.0-4-4-8
Date of Manufacture : 25 grudnia 1999
Set Timing @ 200MHz : 3.0-4-4-8
Set Timing @ 167MHz : 2.5-3-3-7

Memory Module 3
Type : 512MB DDR-SDRAM
Technology : 8x(64Mx8)
Speed : PC3200U 2.5-3-3-8
Date of Manufacture : 25 grudnia 1999
Set Timing @ 200MHz : 3.0-3-3-8
Set Timing @ 200MHz : 2.5-3-3-8
Set Timing @ 133MHz : 2.0-2-2-5

Environment Monitor 1
Model : ITE IT8705F LPC
Version : 2.00
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 32.0°C / 89.6°F
CPU Temperature : 43.0°C / 109.4°F td

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 3184rpm

Voltage Sensor(s)
CPU Voltage : 1.49V
Aux Voltage : 2.56V
+3.3V Voltage : 3.28V
+5V Voltage : 4.95V
+12V Voltage : 11.73V
-12V Voltage : -11.79V
-5V Voltage : -5.21V
Standby Voltage : 3.23V
Battery Voltage : 3.17V

AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 88MHz (352MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : Yes
Side Band Enabled : Yes
Aperture Size : 64MB

PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (44MHz)
Multiplier : 1/3x

LPC Hub Controller 1
Model : Elitegroup Computer Sys VT8233A PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Delayed Transaction Enabled : Yes
Multiplier : 1/4x
Speed : 11MHz
DMA Multiplier : 1/2x
DMA Speed : 5MHz

USB Controller 1
Model : VIA Technologies Inc VT8233A USB Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : VIA Technologies Inc VT8233A USB Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz

Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (VIA Technologies Inc VT8633 Apollo Pro 266 CPU to AGP Controller)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Used
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Available (Abit Computer Corp Radeon 9550)

Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB : USB - None / None

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
Warning 2541 : FSB exceeds Chipset rated speed. Reduce FSB.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2520 : PCI bus speed is too high. Reduce FSB speed or FSB/PCI multiplier.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.